Bitumen Primer D-41 Manufacturer
Bitumen Primer D-41 is an Asphaltic Primer suitable for uses in roofing, dampproofing and waterproofing. It is manufactured as a surface dressing to masonry or concrete to improve the bond of bituminous materials.
Bitumen Primer D-41 is an excellent quality universal primer, manufactured from a special type of bitumen. It is solvent based and commonly applied onto various substrates (concrete, concrete blocks, bricks, foam concrete, fiber and steel substrates) to improve bonding of bituminous products. Tiger Bitumen Primer D-41 is in accordance with ASTM D-41.
Bitumen Primer D-41 Specifications
|Bitumen Primer D-41 Specifications|
|Density. Kg/litre||0.85-0.88||ASTM D-70|
|Saybolt Furol Viscosity at 250C Seconds||25-125||ASTM D-88|
|Tack Free time, hour||2hrs at 300 C||–|
|Distillation, Volume% of the Primer|
|Up to 2250C||35 (Min)||ASTM D-402|
|Up to 3600C||65 (Max)|
|Tests on residue from distillation:||20-50||ASTM D-5|
|Penetration at 250C||99||ASTM D|
|Solubility in trichlorethylene%||2042|
|Water Content||0.5 (Max)||ASTM D-95|
Bitumen Primer Content
To Liquid Cutback Asphalt, containing 30 wt.% of mineral spirits solvent was added 10 wt.% of p-bromobenzotrifluoride to provide a liquid Bitumen Primer D-41 having a VOC concentration of 186 gll and a flash point of 110°F. The resulting Bitumen Primer D-41 composition was rolled at ambient temperature on a plywood roof deck in a 6 mil thick layer. Alternatively, the composition can be sprayed or poured on the deck. The primer layer was then covered with an asphaltic base sheet which was nailed to the deck through the primer under ambient temperature conditions. A granular surfaced bitumen cap sheet was then applied over the secured base sheet by torching.
Features of Bitumen Primer D-41
- Improves the bond of bituminous materials.
- Binder for dust particles.
- Surface dressing to masonry and metal surfaces.
- Conforms to the requirements of ASTM D-41, Type I.
- Conforms to SASO 2057.
- Corrosion and chemical resistant.
- Penetrates and seals porous surfaces.
- Fast drying.
- Cost-effective, no heating, thinning or mixing.
- Compatible with various substrates and structures.